ejotherm® STR U 2G

Specification

  • Applications

    Universal screw-in anchor for countersunk and surface fixed installation in concrete and masonry

     

    • For all substrates (A, B, C, D, E)
    • For all insulation boards
    • For countersunk and surface fixed instalaltion
    • For homogeneous surfaces and even rendering
    • Up to 40% faster installation
    • With European Technical Approval (ETA)
  • Properties

    • Approved for all building materials
    • Countersunk installation - EJOT STR principle with ejotherm STR cap for homogeneous surfaces and even rendering - quick and easy without milling dust
    • Up to 40% fastener installation
    • Reduced thermal transmission (0.001 W/K)
    • Surface fixed installation using ejotherm STR plug
    • Short embedment depths, high loads for maximum safety and economic anchor usage
    • Permanent contact pressure
    • Premounted screw for quick installation
    • 100% setting control: the countersunk installation of the washer indicates safe anchorage
  • Technical specifications

    • Anchor diameter: 8 mm
    • Washer diameter: 60 mm
    • Drill hole depth, countersunk installation h1 ≥: 50 mm (90 mm)
    • Drill hole depth, surface fixed installation h2 ≥: 35 mm (75 mm)
    • Anchorage depth hef≥: 25 mm (65 mm)
    • Screw drive: TORX T30
    • Point thermal transmission χ 
      countersunk installation: 0,001 W/K
      surface fixed installation: 0,002 W/K
    • Use categories acc. to ETA*: A, B, C, D, E
    • German DIBt approval: Z-21.2-1769
    • European Technical Approval: ETA-04/0023

    Values in parentheses: anchoring in aerated concrete (use category E)
    *Specification according to ÖNORM B 6124 for concrete, solid brick and vertical brick


    Characteristic loads:

    Building material class A:

    • Normal weight concrete C 12/15 acc. to EN 206-1: 1.5 kN
    • Normal weight concrete C 16/20 - C 50/60 acc. to EN 206-1: 1.5 kN
    • Pre-cast concrete panel C16/20 - C50/60: 1.5 kN

    Building material class B:

    • Clay bricks (Mz) acc. to DIN 105: 1.5 kN
    • Solid lime sandstone (KS) acc. to DIN EN 106: 1.5 kN
    • Solid masonry of lightweight concrete (V) acc. to DIN 18152: 0.6 kN

    Building material class C:

    • Vertically perforated clay bricks (Hlz) acc. to 105: 1.2 kN
    • Vertical coring reference bricks (Hlz) acc. to ÖNORM B 6124: 0.75 kN
    • Sand-lime perforated (KSL) acc. to EN 106: 1.5 kN
    • Lightweight concrete hollow blocks (HbL)acc. to DIN 18151: 0.6 kN

    Baustoffklasse D:

    • Lightweight aggregate concrete (LAC): 0.9 kN

    Building material class E:

    • Autoclaved aerated concrete P2 - P7: 0.75 kN

    For calculation of design loads the national safety factors have to be included (e.g. Germany: 3). Please observe the approval.

Find the right anchor lengths: ETICS anchor configurator
ETICS products are only available from system suppliers

Filter

Selected filters

    Orderidentifier Article Number Washer diameter mm Anchor diameter mm Length mm Construction way Unit
    ejotherm STR U 2G 135 8719135400 60.0 8.0 135.0 countersank and surface fixed installation, surface fixed installation only

    Specifications

    Washer diameter
    60.0
    Anchor diameter
    8.0
    Length
    135.0
    Construction way
    countersank and surface fixed installation surface fixed installation only
    Insulation thickness
    60.0 80.0 100.0
    tolerance compensation
    10.0 30.0 50.0
    Screw-in-/hammer-inanchor
    screw-in-anchor
    Material
    Carbon Steel
    Orderidentifier
    ejotherm STR U 2G 135
    Unit
    show more
    ejotherm STR U 2G 255 8719255400 60.0 8.0 255.0 countersank and surface fixed installation

    Specifications

    Washer diameter
    60.0
    Anchor diameter
    8.0
    Length
    255.0
    Construction way
    countersank and surface fixed installation
    Insulation thickness
    120.0 220.0 200.0 180.0 160.0 140.0 show more
    tolerance compensation
    10.0 30.0 50.0 70.0 90.0 110.0 show more
    Screw-in-/hammer-inanchor
    screw-in-anchor
    Material
    Carbon Steel
    Orderidentifier
    ejotherm STR U 2G 255
    Unit
    show more
    ejotherm STR U 2G 295 8719295400 60.0 8.0 295.0 surface fixed installation only, countersank and surface fixed installation

    Specifications

    Washer diameter
    60.0
    Anchor diameter
    8.0
    Length
    295.0
    Construction way
    surface fixed installation only countersank and surface fixed installation
    Insulation thickness
    140.0 260.0 240.0 220.0 200.0 180.0 160.0 show more
    tolerance compensation
    10.0 30.0 50.0 70.0 90.0 110.0 show more
    Screw-in-/hammer-inanchor
    screw-in-anchor
    Material
    Carbon Steel
    Orderidentifier
    ejotherm STR U 2G 295
    Unit
    show more
    ejotherm STR U 2G 315 8719315400 60.0 8.0 315.0 surface fixed installation only, countersank and surface fixed installation

    Specifications

    Washer diameter
    60.0
    Anchor diameter
    8.0
    Length
    315.0
    Construction way
    surface fixed installation only countersank and surface fixed installation
    Insulation thickness
    140.0 280.0 260.0 240.0 220.0 200.0 180.0 160.0 show more
    tolerance compensation
    10.0 30.0 50.0 70.0 90.0 110.0 show more
    Screw-in-/hammer-inanchor
    screw-in-anchor
    Material
    Carbon Steel
    Orderidentifier
    ejotherm STR U 2G 315
    Unit
    show more
    ejotherm STR U 2G 395 8719395400 60.0 8.0 395.0 countersank and surface fixed installation

    Specifications

    Washer diameter
    60.0
    Anchor diameter
    8.0
    Length
    395.0
    Construction way
    countersank and surface fixed installation
    Insulation thickness
    300.0 320.0 280.0 260.0 240.0 360.0 340.0 show more
    tolerance compensation
    50.0 110.0 90.0 70.0 10.0 30.0 show more
    Screw-in-/hammer-inanchor
    screw-in-anchor
    Material
    Carbon Steel
    Orderidentifier
    ejotherm STR U 2G 395
    Unit
    show more
    ejotherm STR U 2G 415 8719415400 60.0 8.0 415.0 countersank and surface fixed installation

    Specifications

    Washer diameter
    60.0
    Anchor diameter
    8.0
    Length
    415.0
    Construction way
    countersank and surface fixed installation
    Insulation thickness
    280.0 380.0 360.0 340.0 320.0 300.0 260.0 show more
    tolerance compensation
    110.0 10.0 70.0 90.0 50.0 30.0 show more
    Screw-in-/hammer-inanchor
    screw-in-anchor
    Material
    Carbon Steel
    Orderidentifier
    ejotherm STR U 2G 415
    Unit
    show more
    ejotherm STR U 2G 435 8719435400 60.0 8.0 435.0 countersank and surface fixed installation

    Specifications

    Washer diameter
    60.0
    Anchor diameter
    8.0
    Length
    435.0
    Construction way
    countersank and surface fixed installation
    Insulation thickness
    340.0 280.0 380.0 400.0 360.0 300.0 320.0 show more
    tolerance compensation
    30.0 90.0 50.0 70.0 10.0 110.0 show more
    Screw-in-/hammer-inanchor
    screw-in-anchor
    Material
    Carbon Steel
    Orderidentifier
    ejotherm STR U 2G 435
    Unit
    show more
    ejotherm STR U 2G 455 8719455400 60.0 8.0 455.0 countersank and surface fixed installation

    Specifications

    Washer diameter
    60.0
    Anchor diameter
    8.0
    Length
    455.0
    Construction way
    countersank and surface fixed installation
    Insulation thickness
    420.0 300.0 380.0 400.0 360.0 340.0 320.0 show more
    tolerance compensation
    50.0 70.0 90.0 10.0 30.0 110.0 show more
    Screw-in-/hammer-inanchor
    screw-in-anchor
    Material
    Carbon Steel
    Orderidentifier
    ejotherm STR U 2G 455
    Unit
    show more