EJOT® facade anchor SDF-S-10V

Applications

• Installation of timber or metal attachments
• For non-supporting redundant systems according to ETAG 020
• Suitable for the structural fastening of gates, doors, windows, square timber

Notice
Please observe the European Technical Approval ETA-10/0305 or the german general technical approval Z-21.2-2122 in the planning and processing of products. Further information about parameters and loads can be found in the approval.

Properties

• Countersunk head
• Anchor with an embedment depth of 40 mm in concrete
• Two installation depths (embedment in masonry 50 mm)
• Very short expansion part for extremely fast installation
• Optimal expanding part due to radial expansion
• Very high bending moment
• Product identification through different sleeve colours
• Double safety lock against torsion for secure installation

Technical specifications

Characteristic values

• Diameter: 10 mm
• Hole depth in concrete h_1.1: ≥ 50 mm
• Effective Embedment depth in concrete h_nom,1: ≥ 40 mm
• Hole depth in masonry h_1.2: ≥ 60 mm
• Effective Embedment depth in masonry h_nom,2: ≥ 50 mm
• Drill-hole diameter d₀: 10 mm
• Through hole diameter of component to be attached d_f:Ø 10.5 mm
• Drive: T40

Characteristic loads

• Tensile load N_Rk,p in concrete C12/15
  • Temperature range 30 °C / 50 °C: 4.50 kN
  • Temperature range 50 °C / 80 °C: 4.00 kN
• F_Rk brick Mz 20-1.8, NF: 2.50 kN
• F_Rk solid sand-lime brick KS 36, NF: 4.00 kN
• F_Rk solid sand-lime brick KS 20, 8 DF: 4.50 kN
• Transverse load V_Rk,s in concrete C12/15 at h_nom,1 = 40 mm
  • Anchor with steel screw: 7.93 kN
• Transverse load V_Rk,s at h_nom,2 = 50 mm
  • Anchor with steel screw: 11.09 kN
• Bending moment M_Rk,s at h_nom,1 = 40 mm
  • Anchor with steel screw: 13.80 Nm
• Side load M_Rk,s at h_nom,2 = 50 mm
  • Anchor with steel screw: 23,01 Nm