EJOT® facade anchor SDF-S-8V

Specification

  • Applications

    • The efficient alternative for fixing timber substructures to solid brick masonry and concrete

    Notice

    For planning and processing, please observe ETA-15/0387

    Instructions for using galvanic zinc-plated facade anchor screws (excerpt from ETA-15/0387)

    The special screw made of galvanic zinc-plated steel may also be used outside, after careful installation and if the area of the screw head is protected against moisture and driving rain in such a way, that no moisture can enter the anchor shaft. This requires facade cladding of rain screen fixed in front of the screw head and the screw head has to be coated with a soft-plastic, permanently elastic, bitumen oil combination coat (e.g. car underbody coating or cavity protection).

  • Properties

    • Countersunk head
    • Small drill-hole diameter
    • Product identification through different sleeve colours
  • Technical specifications

    Characteristic values

    • Diameter: 8.0 mm
    • Drive: Hexalobular drive T30
    • Drill hole depth ≥ h1: 60 mm
    • Embedment depth ≥ hnom: 50 mm

    Characteristic loads*

    • Tensile strength NRk,p in concrete < C16/20: 4.50 kN
    • Tensile strength NRk,p in concrete ≥ C16/20: 6.50 kN
    • Brick Mz 28-1.8, NF: 2.50 kN
    • Solid lime sand brick KS, NF 20-2.0: 2.00 kN
    • Transverse strength VRk,s
         Anchor with steel screw: 5.30 kN
    • Bending moment MRk,s
         Anchor with steel screw: 8.20 Nm

    *applies to temperature range 30-50 °C / 50-80 °C

Filter

Selected filters

    Orderidentifier Article Number ø mm Material Anchor length mm Unit
    SDF-S-8Vx80-V 8569080430 8.0 Carbon Steel 80.0 100

    Specifications

    ø
    8.0
    Material
    Carbon Steel
    Anchor length
    80.0
    Clamping thickness

    tfix

    30.0
    Orderidentifier
    SDF-S-8Vx80-V
    Unit
    100
    SDF-S-8Vx100-V 8569100430 8.0 Carbon Steel 100.0 50

    Specifications

    ø
    8.0
    Material
    Carbon Steel
    Anchor length
    100.0
    Clamping thickness

    tfix

    50.0
    Orderidentifier
    SDF-S-8Vx100-V
    Unit
    50
    SDF-S-8Vx120-V 8569120430 8.0 Carbon Steel 120.0 50

    Specifications

    ø
    8.0
    Material
    Carbon Steel
    Anchor length
    120.0
    Clamping thickness

    tfix

    70.0
    Orderidentifier
    SDF-S-8Vx120-V
    Unit
    50
    SDF-S-8Vx140-V 8569140430 8.0 Carbon Steel 140.0 50

    Specifications

    ø
    8.0
    Material
    Carbon Steel
    Anchor length
    140.0
    Clamping thickness

    tfix

    90.0
    Orderidentifier
    SDF-S-8Vx140-V
    Unit
    50
    SDF-S-8Vx160-V 8569160430 8.0 Carbon Steel 160.0 50

    Specifications

    ø
    8.0
    Material
    Carbon Steel
    Anchor length
    160.0
    Clamping thickness

    tfix

    110.0
    Orderidentifier
    SDF-S-8Vx160-V
    Unit
    50
    SDF-S-8Vx180-V 8569180430 8.0 Carbon Steel 180.0 50

    Specifications

    ø
    8.0
    Material
    Carbon Steel
    Anchor length
    180.0
    Clamping thickness

    tfix

    130.0
    Orderidentifier
    SDF-S-8Vx180-V
    Unit
    50
    SDF-S-8Vx200-V* 8569200430 8.0 Carbon Steel 200.0 50

    Specifications

    ø
    8.0
    Material
    Carbon Steel
    Anchor length
    200.0
    Clamping thickness

    tfix

    150.0
    Orderidentifier
    SDF-S-8Vx200-V*
    Unit
    50
    SDF-S-8Vx220-V* 8569220430 8.0 Carbon Steel 220.0 50

    Specifications

    ø
    8.0
    Material
    Carbon Steel
    Anchor length
    220.0
    Clamping thickness

    tfix

    170.0
    Orderidentifier
    SDF-S-8Vx220-V*
    Unit
    50